Solutions · custom-engineered systems

Configured for your site.

BIO POD does not rely on a one-size-fits-all tank range. Tanks are designed and manufactured in-house according to the client's wastewater volume, project requirements, available space and site conditions.

Three configurations Custom tank fabrication In-house manufacturing

01 — Solution options

Three ways to build the treatment.

Each arrangement is engineered for the project. The right choice depends on the wastewater, the land available, the treatment objective and applicable requirements.

A

Standalone BIO POD

BIO POD stage without electricity

What it is

A biological wastewater treatment solution for projects where the BIO POD configuration is suitable.

How it works

Wastewater enters through the designated inlet and passes through the designed internal treatment stages, where microorganisms support the breakdown of organic matter, before leaving through the outlet.

Typical suitability

Households, villas and sites where a compact treatment footprint matters.

Key considerations

Inlet and outlet levels, available installation space, expected wastewater generation and the operating arrangements agreed for the site.

Treatment processBIO POD · 100%
Capacity and site assessment

Capacity and tank dimensions are established from the project's wastewater volume and site survey.

Enquire about standalone BIO POD
B

BIO POD + MBBR

MBBR stage requires electricity

What it is

For projects that require an additional biological treatment stage after BIO POD.

How it works

Approximately 80% of the treatment process takes place in BIO POD and the remaining 20% in a separate MBBR stage, where biofilm grows on moving media.

Typical suitability

Projects needing a further treatment stage where a power supply is available for the MBBR stage.

Key considerations

Electrical supply, aeration equipment, media and maintenance access. The MBBR stage has its own operating requirements.

BIO POD ~80%MBBR ~20%
Capacity and site assessment

Additional plant space and power provision are assessed alongside the BIO POD tank sizing.

Enquire about BIO POD + MBBR
C

BIO POD + reed bed

Described as electricity-free

What it is

A combined biological treatment and reed-bed arrangement, used where adequate land is available.

How it works

Approximately 80% of treatment takes place in BIO POD and the remaining 20% in a planted reed bed. Both stages are described by the company as electricity-free.

Typical suitability

Sites with spare land — schools, campuses, homes with a garden, and developments with open areas.

Key considerations

Land area and levels for the reed bed, hydraulic loading, planting and establishment, and the long-term appearance of the planted area.

BIO POD ~80%Reed bed ~20%
Capacity and site assessment

The reed bed area is sized against the project's flow and the available land on site.

Enquire about BIO POD + reed bed

02 — At a glance

Compare the arrangements.

A high-level comparison. Site conditions and treatment objectives decide the final design.

Solution comparison
Configuration Stages Electricity Land
Standalone BIO POD BIO POD treatment process Designed to operate without electricity Compact tank arrangement
BIO POD + MBBR BIO POD ~80% · MBBR ~20% BIO POD stage none · MBBR stage requires electricity Tank plus space and power for the MBBR stage
BIO POD + reed bed BIO POD ~80% · reed bed ~20% Described as electricity-free Requires additional land for the reed bed

Space comparisons depend on capacity, site conditions and the complete treatment configuration.

03 — Space and value

Reclaim lost STP space and make room for things that add real value.

With BIO POD, the entire STP area can be reclaimed for parking, play zones or future development: unlike conventional STPs that permanently occupy space and cannot be repurposed.

While traditional STPs emit foul odours that lower the appeal and value of ground-floor apartments, the odour-free BIO POD enhances appeal and boosts property value.

Parking Play zones Future development Odour-free

04 — Site assessment

What we need to assess your project.

A useful first conversation covers the site and the wastewater, not just a tank size.

Wastewater flow
Expected daily volume, or the required capacity in KLD where it is already defined.
Site constraints
Available space, access for installation, levels and the inlet and outlet positions.
Wastewater characteristics
Source of the wastewater — domestic, kitchen, commercial or industrial — and any pre-treatment in place.
Treatment objective
Discharge or suitable non-potable reuse, with the applicable standards for the site.
Operation
Who will operate and maintain the system, and whether AMC support is required.
Share your project details

Next step

Share your project details and required capacity.

We will work with you to assess a suitable solution — from a single household tank to a large development.